| Price | $10,000-250,000 | $1,099 | $599 | $199 |
| Grade | Genuine Rolex | AAAAA Clone | AAA Replica | A Replica |
| Movement | Rolex Calibre 3135 | Genuine Swiss Clone 3135 movement | Swiss 2836 Movement | Asian 2813 Movement |
| Time Accuracy | -3/+5 sec per day COSC certified | -5/+6 sec per day COSC certified | -10/+10 sec per day COSC certified | -1/+2 min per day COSC certified |
| Stainless Steel Type | 904L Stainless Steel | 904L Stainless Steel | 316L Stainless Steel | 316L Stainless Steel |
| Crystal | Sapphire crystal | Sapphire crystal correct date magnification | Sapphire crystal | Mineral Glass |
| Case Size | 40mm | 40mm | 40mm | 40mm |
| Logo & Markings | laser etchings | Exact on entire watch | 90% Exact on entire watch | 70% Exact on entire watch |
| Dial | Genuine Rolex | Exact detail and font | 90% exact detail and font | 70% Exact detail and font |
| Luminous Markers | Rolex Lumen | SuperLuminova Swiss Lumen | Swiss Lumen | Normal Lumen |
| Waterproof | 100m on standard models | Tested up to 300m | Tested up to 30m | Life waterproof |
| Life expectancy | Lifetime | Lifetime | 3-5 years | 1-2 years |
| Warranty | 2 Years | Up to 5 Years | Up to 3 Years | Up to 1 Years |
| Movement | Automatic |
| Engine | Rolex Calibre 2836/2813 |
| Series | Submariner |
| Band Width | 20mm |
| Gender | Men’s |
| Brand | Rolex |
| Model | PINKLADY |
| Case Color | Silver-tone |
Band Material: 316L. The band is the most important part of the watch. 316L is one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Watch Case: 316L. The case is made of the hardest 316L material, which will never fade, deform, or abrade the skin, and is environmentally friendly.
Case Back: Solid. The case uses a thickened solid case back, which is more water-resistant than the through-bottom. A waterproof sealing ring is added to the through-bottom watch, which makes it difficult to seal.
Crystal: Sapphire Crystal. Sapphire crystal is the only high-quality anti-reflective material that provides scratch resistance without affecting its brightness. Using this new technology, you can protect the surface of your watch at the most important moments in your life. Tips: The A Replica is applied with mineral glass instead of sapphire.
Second Markers: Minute Markers around the outer rim. The second mark on the watch is the minute mark around the outer edge.
Dial Markers: luminous dot. We can use a watch with a luminous point, which is a small LED light source, which can be used as a time indicator for the watch.
Luminiscence: Hands and Markers. About the watch, the luminiscence is hands and markers. It makes your watch look more high-end.
Bezel Material: Stainless Steel. Bezel material has been around since ancient times. It has been used as a decorative material for watches and clocks for more than two thousand years. A watch face made from stainless steel bezel materials can withstand extreme temperatures.
Clasp: Fold Over Clasp. A fold over clasp are used in the watch which is more convenient for disassembly and replacement, and also ensures the quality and comfort of the strap.
Water Resistance: 30 meters. The waterproof depth of the watch is 30 meters. But make sure to close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Function: Date, Hour, Minute, Second. The watch has many functions. The watch is equipped with a indicate date that can measure time, the minute dial can estimate the current time, and the stop dial can estimate the time after an interval.
Reviews
There are no reviews yet.